HIGH-DENSITY DRIVE-IN RACKING

Store More Pallets Per Aisle With Southward’s Drive-In Racking

When floor space is tight and you’re storing large volumes of similar pallets, picking aisles waste capacity you can’t afford to lose. Southward’s Drive-In Racking eliminates them – letting forklifts drive directly into the lane for safe, high-density block stacking of goods too fragile to stack unsupported.

Maximum Storage Density for High-Volume, Low-SKU Pallet Runs

Drive-In Racking removes picking aisles entirely, letting forklifts drive straight into the racking structure to place and retrieve pallets. It’s built for sites storing large quantities of the same or similar pallets, where maximising cubic storage matters more than accessing every SKU individually.

The system provides safe block stacking for goods that are too fragile to be stacked directly on top of each other, supported by frames, beams and bracing in powder-coated or pre-galvanised steel. Southward offers three configurations – Single Drive-In, Double Drive-In and to match different load and unload patterns.

Compare Your Racking Options

Shuttle RackingDrive-In RackingSelective / Double Deep
Best forLarge quantities of similar pallets, fewer SKUsHigh-volume, high-density storage of similar SKUsFast, direct access to every pallet or SKU variety
Forklift enters racking?Yes – forklift drives into the laneNo – shuttle handles in-lane movementYes, at the aisle face
Stock rotationLIFO (single entry)FIFO or LIFO, depending on lane configurationFIFO, batch-in/batch-out (Double Deep)
Storage densityHigh – no picking aislesSimilar to Drive-in racking but without the risk of damage by forklifts driving into the lanes.Double Deep: ~40% more than Selective

Three Configurations to Match Your Load and Unload Pattern

Choose the drive-in layout that fits how pallets move through your site – from single-entry storage.

Drive-In Racking
Single Drive-In Racking

Pallets are loaded and unloaded from the same end of the lane, on a last-in-first-out (LIFO) basis. Suited to sites with one access point and stock that doesn’t need strict rotation.

Double Drive-In Racking

Two lanes share a common back-to-back structure, increasing storage density further while keeping load and unload on a LIFO basis per lane.

Safe block stacking

The racking structure supports pallets that are too fragile to stack directly on top of each other, protecting stock while still achieving high-density storage.

Built on Southward racking components

Frames, beams and supports in powder-coated or pre-galvanised steel, consistent with our standard pallet racking range. Drive-in racking is typically configured 8–12 pallets deep per lane.

Built for High-Volume, High-Density Operation

Safety

Configurable to single, double layout to match site traffic flow and reduce forklift manoeuvring inside the structure.

Structure

Frames, beams and supports in powder-coated or pre-galvanised steel finish, engineered for repeated forklift entry.

Stock protection

Safe block stacking for pallets too fragile to stack unsupported, reducing damage and waste.

Scalability

Extend lanes or add bays as storage volume grows, without redesigning the site layout.

Audits, Repairs & Maintenance

Everyday wear and tear can compromise the strength and structural integrity of pallet racking. Annual inspections are important for identifying damaged components early and putting the right actions and controls in place

Guidance from WorkSafe recommends regular checks of shelving systems for damage from forklifts or equipment handling machines.

Our maintenance team carries out repairs on all racking types nationwide, whether welded or bolted, keeping racking secure and safe for staff to work around. Inspections are done according to the AS4084.2:2023 standard and covers all elements of your system. Always keeping your downtime in mind, audit and maintenance scheduling is kept to a minimum to not impact operations.

Book an Audit
Audits, Repairs

What automation changes on the floor

0%
Increase in storage density vs Selective Racking
0%
Reduction in racking damage incidents vs Drive-In
0%
Reduction in forklift travel time / aisle congestion
0%
Throughput increase (pallets/hour) once shuttle is in operation

Frequently Asked Questions?

Single Drive-In loads and unloads from one end on a LIFO basis. Double Drive-In uses two lanes back-to-back for greater storage density, while maintaining LIFO operation per lane.

Both are high-density, deep-lane systems, but with drive-in racking the forklift drives directly into the lane to place each pallet. With shuttle racking, the forklift stays at the lane entrance and a motorised shuttle moves pallets within the lane instead.

Yes. The racking structure supports safe block stacking for goods too fragile to be stacked directly on top of each other, so fragile stock stays protected while you still achieve high-density storage.

Yes. Most sites combine drive-in racking for high-volume, low-SKU stock with Selective or Shuttle Racking for lines that need faster individual access. We’ll confirm the right mix during a site assessment.

Not Sure Which Drive-In Configuration Fits Your Site?

Every warehouse layout and stock profile is different. Book a consultation and we’ll assess your site, pallet types and throughput needs to recommend the right high-density storage solution – drive-in, shuttle or double deep – for your operation

Request a Consultation for Your Drive-in Racking System

Tell us about your warehouse, pallet profile, storage requirements and throughput targets. Our team will recommend a shuttle racking solution designed around your site and operation.

  • Your information is secure and will never be shared with third parties.